- Specs
- Testing
- Reviews
- FAQ
Specifications for the Voyager 25ft. Extension Cable
| Weight (Lbs) |
1 |
|---|
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN & Voyager products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Audio & Video products and Voyager Camera Systems offer MORE durability and performance than you would expect from standard electronics.
Product FAQs
-
Since SIRIUS and XM merged, can I use XM tuners in place of SIRIUS tuners?
While SIRIUS and XM have merged, they operate different broadcasts and are separate services. The tuners are not interchangeable.
-
I have SIRIUS Marine Weather in my boat. Can I use that with my JENSEN Marine SIRIUS-ready radio?
SIRIUS Weather is a separate service from SIRIUS Radio programming. These devices are not compatible with JENSEN Marine SIRIUS-ready radios in a Direct Connect fashion. JENSEN Marine SIRIUS-ready radios require a dedicated SIRIUS Radio tuner for Direct Connect capability. You may connect the audio out from your SIRIUS Marine Weather device to your JENSEN Marine radio's Auxiliary Input.
-
My radio is SIRIUS-ready. Where do I find the ESN#?
The ESN# (SID#) is located on the SIRIUS tuner (sold separately). This # can be accessed through the radio's display when connected to the SIRIUS tuner. See the radio's manual for instructions.
-
My radio says it is SIRIUS-ready. Why can't I get SIRIUS to work?
SIRIUS-ready radios require a separate SIRIUS tuner module and SIRIUS antenna as well as a subscriptoin to SIRIUS Satellite Radio service.
-
The radio has four speaker outputs, but I only have two speakers. Can I combine or "bridge" the four outputs into two for more power?
It is not recommended to combine or "bridge" the outputs as damage will occur. Use only the Front or Rear pair and insulate the unused wires to prevent a short. Use of an external power amplifier is recommended for applications requiring more power.
