- Features
- Specs
- Manuals & Guides
- Testing
- Reviews
- FAQ
Features for the JENSEN AM/FM/CD/iPod and SIRIUS Satellite Radio Ready Under Cabinet Stereo System
- AM/FM/CD/iPod & SIRIUS Satellite Radio Ready Under Cabinet Stereo System
- JIPDCBL01 1ft. Black iPod Cable Included for connection to iPod allowing full controls through the stereo
- 160 Watts
- Front Auxiliary 3.5mm jack
- Wired Remote Ready (MWR75 and MWR100)
- Positive LCD Display
- Preamp Line Level Outputs
- 40 Seconds of Electronic CD Skip Protection
- Non-volatile memory for presets & user settings 2-wire power (ACC, GND)
- Conformal Coated PCB
- Plastic PCB Insulator
- Solid Top Chassis
- ASTM B117 Salt Spray Exposure Standard Compliant
- ASTM D4329 UV Exposure Standard Compliant
- Low Battery Audible Warning - A low voltage audible warning will alert you when voltage is low. Station presets and Marine Stereo settings are written to a memory chip and maintained when power feed is disconnected.
- Zero Current Memory Draw - This stereo does not require a constant battery standby power feed which means the stereo keeps station presets without running the battery down.
- Full iPod Controls - When you plug your iPod or MP3 player into your new Marine Stereo you can control the function using the stereo controls - no need to fumble around with your iPod while driving; now it can stay protected and out of the way.
NOTE: JIPDCBL01 1ft. Black iPod Adapter Included.
*iPod Compatibility Information: Please refer to this guide to see if your
iPod or iPhone is compatible with our JENSEN iPod Ready Stereos.
Not sure which iPod model you have? Click here to find out.
- SIRIUS Satellite Radio Ready - Enjoy over 120 channels of the best commercial-free music, sports, information and entertainment, with 65 channels of 100% commercial-free music, and 55 channels of world-class sports, news, talk, entertainment, traffic and weather.
NOTE: Separate SIRIUS Satellite tuner and SIRIUS Satellite subscription are required to receive a SIRIUS Satellite signal. Each sold separately.
DLP2500RTL - REV. A, B, & C
DLP2500G3RTL - REV. D and Later
To subscribe to the SIRIUS service call toll-free at 1-888-539-SIRIUS
or click here to visit their website.
Specifications for the JENSEN AM/FM/CD/iPod and SIRIUS Satellite Radio Ready Under Cabinet Stereo System
| Weight (Lbs) |
9 |
|---|---|
| Overall Dimensions |
21"W x 5-3/8"H x 10-3/8"D |
| Maximum Power Output (Watts x Channel) |
40 x 4 |
| Signal-to-Noise Ratio @ 1Watt/4 Ohms (dB) |
>75 |
| Mounting Hole Dimensions (Inches WxH) |
N/A |
| Mounting Depth (Inches) |
10-3/8 |
| Watertight Standard Compliant |
No |
| Conformal Coated PCB |
Yes |
| Plastic PCB Insulator |
Yes |
| Chassis |
Solid Top |
| iPod Ready |
Yes |
| Gen3.0 SIRIUS Satellite Radio Ready |
Yes |
| Wired Remote Control Ready |
Yes |
| Wireless Remote Control Ready |
Yes |
| Positive LCD Display |
Yes |
| CD/CD-R/CD-RW Playback |
Yes |
| MP3/WMA Playback |
No |
| AM/FM Tuner |
Yes |
| Selectable AM/FM Frequency Spacing US/European |
Yes |
| USB Input |
No |
| 1GB Onboard Memory |
No |
| Auxiliary Audio Input |
Yes |
| Preamp Line Level Outputs |
Yes |
| Electronic Disc Skip Protection (Seconds) |
40 |
| Radio Broadcast Data System Text Display |
No |
| Non-Volatile Memory for Presets & User Settings 2-Wire Power (Access ACC, GND) |
Yes |
| NOAA Weatherband/Weather Alert |
No |
| ASTM B117 Salt Spray Exposure Standard Compliant |
No |
| ASTM D4329 UV Exposure Standard Compliant |
Yes |
Manuals & Guides for the JENSEN AM/FM/CD/iPod and SIRIUS Satellite Radio Ready Under Cabinet Stereo System
Product Downloads
 |
JENSENiPODQRG Compatibility Guide (Size: 627.5 KB) | |
|
MSR3007 Owners Manual (Size: 1.8 MB) | |
|
MSR3007 Quick Reference Guide (Size: 684 KB) | |
|
What does iPod Ready Really Mean? (Size: 602.5 KB) | |
|
What does SIRIUS Satellite Radio Ready Really Mean? (Size: 758.7 KB) |
Troubleshooting Guides
|
MSR3007RTL Troubleshooting Guide (Size: 91.2 KB) |
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN & Voyager products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Audio & Video products and Voyager Camera Systems offer MORE durability and performance than you would expect from standard electronics.
Temperature/Vibration Chamber
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
UV/Salt Fog Corrosive Exposure Chamber
Exterior components are subjected to accelerated UV exposure that equates to 5-7 years of actual outdoor exposure to assure you that your electronics will look great for many years. In addition, product and product components are subjected to dry/wet cycles of highly corrosive fog/mist to test for corrosion resistance and corrosion protection effectiveness.
Electrostatic Discharge
The last thing you need is for your radio to quit due to accidental static shock. That’s why our products go through the extensive Electrostatic Discharge Test on all exposed control areas as well as I/O connections so they can withstand the most severe static build up. Shocking, isn’t it?
Load Dump
Severe electrical environments are relatively common mobile applications. We understand these environments and what it takes to protect electronics that will be exposed to them. That’s why all of our products include specific and significant front-end circuit protection and filtering that is proven to withstand the toughest electrical environments. The Load Dump Tests puts destructive pulses (spikes) to simulate the sudden disconnection of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential of destruction ensuring that our electronics are protected.
DC Voltage Overstress
Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products: Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.
Reverse Polarity
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
Shorted I/O
Ensures that product will function when inputs and outputs are connected improperly to the product.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
High/Low Storage Temperature
Ensures your JENSEN products will perform even after prolonged periods of storage with no power in extreme hot or cold temperatures.
Temperature Cycle
Used to ensure powered components withstand temperature fluctuations.
High-Pressure Spray
Subjects externally mounted products to high pressure water by blasting the product with 13,000 lbs. of water pressure as close as 6 inches to the product.
Pushbutton/Hinge/Mechanism Durability Cycle
Life cycle robotic testing of all buttons and hinge mechanism for durability.
RF Performance Testing
RF performance is central to the user experience for many of our products. The RF Performance test ensures that our products keep clean signals in and the bad signals out, so that users are always left with a steady signal without outside interference. We not only test for high level RF performance during product design, but we also take a random sampling from each production lot and test it to ensure performance consistency. A battery of over 80 performance tests are conducted to analyze and validate RF and audio performance.
Inductive Load Switching
Tests product well above and below the average waveform to ensure that it can withstand the extreme fluctuations.
Questions about the JENSEN AM/FM/CD/iPod and SIRIUS Satellite Radio Ready Under Cabinet Stereo System
Ask a Tech Expert Your Question:
-
I already have SIRIUS/XM in my truck, will I get it on this radio or will I have to have another subscription?From Frank at 5/9/10 12:30 PMThe UTCMSR3007IP is a SIRIUS READY stereo system. This means that it has the ability to control a SIRIUS tuner. This is an optional item that can be purchased from our website, along with the SRA25 SIRIUS antenna. The model number of the Sirius tuner is DLP2500G3RTL. This unit will require it's own SIRIUS subscription.
