- Features
- Specs
- Manuals & Guides
- Testing
- Reviews
- FAQ
Features for the JENSEN AM/FM/CD/DVD/WB/USB Wallmount Stereo
- 12V DC Power
- 132 Watts
- AM/FM Electronic Tuner (US/Euro)
- Aux A/V in (front and rear)
- 2 Composite video outputs
- 3 Zone (A, B, C) Speaker Output
- Front USB input supports MP3/WMA/JPEG formats
- Front Panel Headphone Out (1/8” Jack)
- Fully suspended slot-type DVD deck mechanism
- 30 Programmable Station Presets (18FM, 12AM)
- Clock with Sleep Timer
- Alarm Clock
- Low, medium and high adjustable LCD dimmer setting
- External IR repeater input
- Wireless Remote Included
- Dimensions: 10-7/16"W x 7"H x 5"D
The AWM970 can easily replace your Concertone stereo by using our retrofit cable (31100133), simply plug and play!
Specifications for the JENSEN AM/FM/CD/DVD/WB/USB Wallmount Stereo
| Weight (Lbs) |
5.5 |
|---|---|
| Maximum Power Output (Watts x Channel) |
22.5 x 4 |
| Signal-to-Noise Ratio @ 1Watt/4 Ohms (dB) |
79 |
| Mounting Hole Dimensions (Inches WxH) |
9.30 x 5.11 |
| Watertight Standard Compliant |
No |
| Conformal Coated PCB |
No |
| Plastic PCB Insulator |
No |
| Chassis |
In-Wall |
| iPod Ready |
No |
| Gen3.0 SIRIUS Satellite Radio Ready |
No |
| Wired Remote Control Ready |
No |
| Wireless Remote Control Ready |
No |
| Positive LCD Display |
Yes |
| CD/CD-R/CD-RW Playback |
Yes |
| MP3/WMA Playback |
Yes |
| AM/FM Tuner |
Yes |
| Selectable AM/FM Frequency Spacing US/European |
Yes |
| USB Input |
Yes |
| 1GB Onboard Memory |
No |
| Auxiliary Audio Input |
No |
| Preamp Line Level Outputs |
No |
| Electronic Disc Skip Protection (Seconds) |
DVD - 5, CD Audio - 15, CD MP3 - 40 |
| Radio Broadcast Data System Text Display |
No |
| Non-Volatile Memory for Presets & User Settings 2-Wire Power (Access ACC, GND) |
No |
| NOAA Weatherband/Weather Alert |
Yes |
| ASTM B117 Salt Spray Exposure Standard Compliant |
No |
| ASTM D4329 UV Exposure Standard Compliant |
No |
Manuals & Guides for the JENSEN AM/FM/CD/DVD/WB/USB Wallmount Stereo
Product Downloads
 |
AWM970 Owners Manual (Size: 3.2 MB) |
Troubleshooting Guides
|
AWM970 Troubleshooting Guide (Size: 95.6 KB) |
Testing
Our hands on Engineering Research and Development team builds quality into our JENSEN & Voyager products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily conducted in our own on-site test lab. Therefore, JENSEN Audio & Video products and Voyager Camera Systems offer MORE durability and performance than you would expect from standard electronics.
Temperature/Vibration Chamber
Long-Duration product exposure to constant random-frequency operational vibration and non-operational vibration to simulate rugged road conditions. Simultaneous temperature cycle and vibration exposure are also conducted for additional data that is relevant to detecting potential material/component weaknesses and calculating product life-expectancy.
DC Voltage Overstress
Uses a power supply, applies 18 VDC for 5 minutes. For Heavy Duty products: Applies 24 VDC for 5 minutes to simulate a vehicle that is jumpstarted.
Reverse Polarity
The Reverse Polarity test uses a car battery to test durability of the product when the (+) and (–) cables are accidentally reversed.
Power Line Noise Rejection
Test throws noise onto the signal and simulates product reaction to alternator whine.
Simulated Crank Start Voltage
Used to test electronics depreciation and altercations when vehicle is turned on.
High/Low Operating Voltage Test
Both tests used to ensure electronics consistency when vehicle battery goes below or above the normal 12V. Product must remain operational throughout the test.
Shorted I/O
Ensures that product will function when inputs and outputs are connected improperly to the product.
High/Low Operating Temperature
Long-Duration product exposure to operational temperature extremes and rapid temperature cycles that are experienced in outdoor mobile applications. In addition we test for High humidity introduced at high-temp to test effectiveness of circuit corrosion protection (conformal coating).
Pushbutton/Hinge/Mechanism Durability Cycle
Life cycle robotic testing of all buttons and hinge mechanism for durability.
RF Performance Testing
RF performance is central to the user experience for many of our products. The RF Performance test ensures that our products keep clean signals in and the bad signals out, so that users are always left with a steady signal without outside interference. We not only test for high level RF performance during product design, but we also take a random sampling from each production lot and test it to ensure performance consistency. A battery of over 80 performance tests are conducted to analyze and validate RF and audio performance.
Reviews for the JENSEN AM/FM/CD/DVD/WB/USB Wallmount Stereo
Customer Reviews
-
easy to install
Rating this unit fit right in and the wiring harness matched what was there this unit works great -
Does the job but lacking a few features
Rating Everything works well, my only complaint is that the USB port does not support any video formats at all, not even basic AVI, MP4 or DVR-ms. Who wants to carry DVDs anymore? This would be a great device 5 years ago but is dated now. -
Purchased as a plug and play replacement
Rating After the Jensen unit in my trailer failed (out of warranty) I purchased this unit as a replacement. Was a direct plug in replacement so install was easy. CD/DVD etc. all works great. -
Works great !!!
Rating In looking at a new trailer (I bought a 2011 Keystone Cougar). One of the audio requirements was to be able to use my iPod. This unit works great. The wife is happy with the DVD player too. -
Good system so far
Rating Came pre-installed in my Keystone Cougar, good audio/video system so far. The USB input is great for access to digital music (a much more efficient storage method than CDs) - and the sleep timer lets me turn on some music before bed (calms the kids down) and turns the system off in an hour or so. Still trying to figure out if I can input video from the USB port. -
Great system for our 5th wheel camper
Rating We just returned from a 3 week trip to Yellowstone NP, enjoyed listing to music every morning and evening thru our Jensen AWM970 unit. Radio, DVD and external music source all played exeception.
Still exploring how to connect IPod to system as an additional source of music.
Questions about the JENSEN AM/FM/CD/DVD/WB/USB Wallmount Stereo
Ask a Tech Expert Your Question:
-
Can I connect my iPod through the USB input on the AWM970?
From Donald at 10/7/11 5:27 PMThe AWM970’s USB input is only compatible with USB flash drives up to 4 gigs and will not work with an iPod. An iPod can be connected to the front AUX AV input jack from the headphone output on the iPod. This will allow the audio to pass through, but will not provide playback ability or charging for the iPod.
-
Is it possible to connect a Sirius plug and play unit to the AWM970?
From gary at 10/7/11 3:25 PMThe AWM970 has a front AUX AV input that you can use to pass the audio through from devices like an MP3 player or a plug and play satellite receiver.
-
Is the USB input on the AWM970 compatible with video files?
From Alex at 6/6/11 7:03 PMThe AWM970's USB input is compatible with some MOV and MPEG-2 video formats.
